The Foscam FI9821W V2 IP camera is super popular these days. It’s about $150 on Amazon right now. The instructions come with Windows and Mac setup software, but you really don’t need it. IP Camera Tools. MJPEG cameras marked 'M' behind LAN IP,H.264 cameras marked 'H' behind LAN IP. Ip Camera Tool For Mac Foscam Software. Based on the settings in this window you can see some information about the network. Your network may be different. Notice the camera’s IP address is 192.168.1.204, this is the current IP address of the camera that we want to change. Notice that the Gateway is 192.168.1.1, this is the IP address of the.
In this article we will show the procedure of resetting a Foscam camera. Quite often an end user may encounter a situation when the password is forgotten for a specific camera or let’s say it needs to reset the settings and start from the beginning. This procedure restores the camera settings to the factory default.
Foscam Fi8910w Ip Camera Tool
Foscam Ip Camera Setup
Java jre 1.6 for mac. To reset a Foscam camera, locate the reset button and press it for approximately 30 seconds. After that the camera will reboot itself and the factory settings will be restored. Some models require only a 10-15 second timeframe. To be sure, hold the button for 30 seconds. If the Foscam camera shows the message “Reset successful” before the 30 second timeframe passes, please release the reset button.
After the reset procedure is done, the username will be “admin” and no password (leave the password field blank). After the first login to the camera you will be prompted to create a new username and password.
Reset button location on Foscam cameras
1. On Foscam indoor PT cameras the reset button is located either on the bottom of the camera in a little hole or is on the side of the body. Use the end of a paperclip to press the button.
2. On Foscam indoor cube cameras the reset button is located on the back of the unit (as shown on the picture below)
3. On Foscam indoor dome cameras the reset button is located on the tail cable coming out of the back of the camera.
4. On Foscam outdoor bullet style cameras the reset button is located on the tail cable coming out of the back of the camera.
5. On Foscam outdoor PT (pan-tilt) cameras the reset button is located on the tail cable coming out of the back of the camera.
6. On the Foscam Fosbaby series of the cameras the reset button is located on the body of the camera.
If after pressing the reset button for 30 seconds the camera does not successfully reset, try to power cycle the unit off and on again (power off the camera then power it on). Repeat the procedure of pressing the reset button for 30 seconds. The camera should successfully reset now.